ARTIST WITH CAMERAS

Courses / The Exposure Triangle

The Exposure Triangle

Aperture, shutter speed and ISO: three controls, one result, and every trade-off you will ever make.

One amount of light, three ways to set it

Exposure is how much light reaches the sensor. Three settings control it, and they are linked: change one and you must change another, or the picture gets lighter or darker.

Photograph by Laurence Balter from the Street gallery
Example from the Street gallery.

Aperture

The opening in the lens, written as f/2, f/8, f/16. A small number is a big opening: more light and a shallow band of focus. A large number is a small opening: less light and more of the scene sharp. Aperture is your depth-of-field control.

Shutter speed

How long the sensor sees light. 1/1000 s freezes a runner; 30 seconds turns a rough sea to mist. Shutter speed is your motion control, and my long-exposure work lives at the slow end.

ISO

The sensor’s amplification. Low ISO is clean; high ISO lets you shoot in dim light at the cost of noise. Most photographers set it last, after aperture and shutter have done their jobs.

Photograph by Laurence Balter from the Street gallery
Example from the Street gallery.

The stop

A stop is a doubling or halving of light. Opening the aperture one stop, doubling the shutter time, or doubling ISO each give the same brightness change. That is what makes trade-offs possible: close the aperture two stops for sharpness, and open the shutter two stops to compensate.

Try thisPick a scene and shoot three frames that are equally bright but use f/2.8, f/8 and f/16. Look at what changes: the background, and the shutter time you needed.

Decide first what the picture is about — depth, motion or cleanliness — and let that choose the dial you set first. The other two follow. My long exposure lesson shows the shutter-first version in practice.